Survey - Auto Points
Field
Option
<Slope Dist:>
Output
<Hz:>
Output
<V:>
Output
Next step
IF
THEN
auto points are to be
START (F1). Then, for <Log By: User Decides>, REC (F3) whenever
logged
an auto point is to be stored.
offset points are to
OFST1 (F4) or OFST2 (F5). Refer to "48.4 Offset Points of Auto
be configured
Points".
Description
The measured slope distance.
When START (F1) is pressed, <EDM Mode:
Tracking> is set and the slope distance is constantly
updated.
The current horizontal angle.
The current vertical angle.
TPS1200
1221