Leica TPS1200 series Technical Reference Manual page 1157

Setup
Field Option
<FILL:> or <CUT:> Output
<Height> or <Ht:> Output
Next step
CONT (F1) to return to the SETUP Measure Target screen.
Description
The height difference between the target point and
the measured point. Field is <CUT:> when the meas-
ured point is higher than the target point and <FILL:>
if the measured point is lower than the target point.
Shows ----- before the first distance measurement
with DIST (F2) or if the target point is a 2D point.
The measured height of the current position. Shows
----- before the first distance measurement with DIST
(F2) or if the target point is a 2D point.
TPS1200 1157