Leica TPS1200 series Technical Reference Manual page 989

Reference Line
The fields available depend on the options chosen for <Heights:> and <Edit Height:> in
REFLINE Configuration, Heights page and <Task:> in REFLINE Choose Task & Refer-
ence Line, Reference page. The following fields are always available:
Description of fields
Field Option
<Point ID:> User input
SHIFT 2FACE (F4)
To take a measurement in Face I and Face II.
The point stored is an average of the two
measurements.
When using instruments fitted with ATR, the
point is automatically measured in both faces,
the resulting point is stored and the instrument
is returned to the first face.
This hotkey is only available for <EDM Mode:
Standard> and <EDM Mode: Fast> and in the
Survey, Reference Line and Stakeout
programs.
SHIFT INDIV (F5) and SHIFT RUN (F5)
To change between entering an individual
point ID different to the defined ID template
and the running point ID according to the ID
template. Refer to "16.1 ID Templates".
Description
The point ID of the point to be measured.
TPS1200 989