Leica TPS1200 series Technical Reference Manual page 1056

Sets of Angles
Description of fields
Field Option
<Fixpoint Job:> Choicelist
<Job:> Choicelist
<Coord System:> Output
<Codelist:> Choicelist
Output
TPS1200
CSYS (F6)
To select a different coordinate system.
Description
The job where the target points to be observed can be
selected and a points list created. All jobs from Main
Menu: Manage...\Jobs can be selected. Determines
the active coordinate system. The data from this job
is shown in MANAGE Data: Job Name.
The active job. All jobs from Main Menu:
Manage...\Jobs can be selected. Determines the
active coordinate system. The data from this job is
shown in MANAGE Data: Job Name.
The coordinate system currently attached to the
selected <Job:>.
No codes are stored in the selected job. All codelists
from Main Menu: Manage...\Codelists can be
selected.
Codes have already been stored in the selected job.
If codes had been copied from a System RAM
codelist, then the name of the codelist is displayed. If
codes have not been copied from a System RAM
codelist but typed in, then the name of the active job
is displayed.
1056