Leica TPS1200 series Technical Reference Manual page 957

The Heights page
Reference Line
Field Option
<Beep near Pt:> Yes or No
<Dist from Pt:> User input
Next step
PAGE (F6) changes to the Heights page.
Description of fields
Field Option
<Heights:> Choicelist
Use Ref Line
Description
The instrument beeps when the horizontal radial
distance from the current position to the point to be
staked is equal to or less than defined in <Dist from
Pt:>.
Available for <Beep near Pt: Yes>. The horizontal
radial distance from the current position to the point
to be staked when a beep should be heard.
Description
Available if this screen was accessed from REFLINE
Reference Line/Arc Begin. Depending on the task
chosen this parameter controls the following.
• When measuring to a line/arc, it determines the
delta height value which is displayed when points
are being measured.
• When staking to or gridstaking a line/arc, it deter-
mines the height value to be staked out.
Heights are computed along the reference line/arc.
TPS1200 957