Leica TPS1200 series Technical Reference Manual page 1181

Stakeout
Description of fields
Field Option
<Point ID:> Choicelist
SURVY (F5)
To access Survey application program to
measure points independent from the Stakeout
application program. To return to Stakeout
application program, press SHIFT QUIT (F6) or
ESC.
PAGE (F6)
To change to another page on this screen.
SHIFT CONF (F2)
To configure stakeout. Refer to "46.3 Config-
uring Stakeout".
SHIFT POS2D (F3)
To position the telescope (X,Y) onto the point
to be staked.
SHIFT POS3D (F4)
To position the telescope (X,Y,Z) onto the point
to be staked.
SHIFT MSTAK (F5)
To enter angle and distance values to stake out
a point. Refer to "46.4.2 Manual Entry of Points
to be Staked".
Description
The point ID of the point to be staked. Accesses
STAKEOUT Data: Job Name where points are
shown according to sort and filter settings and staked
points are indicated by .
TPS1200 1181