Leica TPS1200 series Technical Reference Manual page 1140

Hide thumbs Also See for TPS1200 series:

Table of Contents

Station Setup

<Station ID:> Enter the instrument station.

<Instrument Ht:> Enter the height of the instrument station.

<Stn Ht From:> Select the source for the instrument station height.

<Station Ht:> Enter the elevation of the instrument station.

Press CONT (F1) to access SETUP Measure Target.

To accept all settings and continue. The

chosen settings are activated and the next

screen SETUP Measure Target is displayed.

To display the geometric corrections used with

the measurements. Refer to "17.4 TPS Correc-

To display the atmospheric corrections used

with the measurements. Refer to "17.4 TPS

Corrections".

SHIFT CONF (F2)

To configure the application program SETUP.

The screen SETUP Configuration is

displayed. Refer to "45.3 Configuring Setup".