NMEA Message Formats
Appendix F
F.1
Description
Access
Steer from a connected
device
NMEA Message Formats
Overview
National Marine Electronics Association is a standard for interfacing marine electronic
devices. This chapter describes all NMEA-0183 messages which can be output by the
receiver.
To set the output of NMEA messages on the receiver
Select Main Menu: Config...\Interfaces...\NMEA Out.
OR
Within the configuration set wizard. Refer to "11 Manage...\Configuration Sets".
Use a query message. Refer to the interface control documents for GPS1200 for information
on this query message. The firmware CD contains these documents in electronic format.
A Talker ID appears at the beginning of the header of each NMEA message.
The Talker ID can be user defined or standard (based on the NMEA 3.0). This is normally
GP for GPS but can be changed in CONFIGURE NMEA Output 1 or CONFIGURE NMEA
Output 2.
TPS1200
1340