Leica TPS1200 series Technical Reference Manual page 916

GPS Survey
GPS SURVEY
GPS Survey,
Survey page
Field Option
<Codelist:> Choicelist
Output
<Config Set:> Choicelist
<Antenna:> Output
Next step
CONT (F1) accepts the changes and accesses GPS SURVEY GPS Survey.
Overview
Important feaures about this screen:
• Upon entering GPS SURVEY GPS Survey SmartStation switches into GPS mode.
• The display mask for GPS SURVEY GPS Survey is fixed and is not configurable.
TPS1200
Description
No codes are stored in the selected <Job:>. All
codelists from Main Menu: Manage...\Codelists can
be selected.
Codes have already been stored in the selected
<Job:>. If codes had been copied from a System
RAM codelist, then the name of the codelist is
displayed. If codes have not been copied from a
System RAM codelist but typed in manually, then the
name of the active job is displayed.
The active configuration set. All configuration sets
from Main Menu: Manage...\Configuration Sets
can be selected.
Opening the choicelist accesses MANAGE
Antennas.
The default antenna is SmartAntenna.
916