Leica TPS1200 series Technical Reference Manual page 958

Reference Line
Field Option
Use Start Point Heights are computed relative to the height of the
Use DTM
Model
Output
<Edit Height:> No
Yes
Next step
PAGE (F6) changes to the Logfile page.
TPS1200
Description
starting point.
The stake out height is computed from the DTM
being used.
Available unless this screen was accessed from
REFLINE Reference Line/Arc Begin.
The field <Height:> for the height of the current posi-
tion is displayed in REFLINE Measure Points, Ref
XX page, REFLINE Enter Offset Values, REFLINE
XX Stakeout, Ref XX page and REFLINE +yyy.yy
+xxx.xx, Stake page. The value for <Height:>
cannot be changed.
The field <Design Ht:> is displayed in REFLINE
Measure Points, Ref XX page, REFLINE Enter
Offset Values, REFLINE XX Stakeout, Ref XX
page and REFLINE +yyy.yy +xxx.xx, Stake page.
The design height is the height of the point to be
staked. The initial value is as configured in the
<Heights:> field. The value for <Design Ht:> can be
changed.
958