Leica TPS1200 series Technical Reference Manual page 1226

Survey - Auto Points
Description of fields
Field Option
<Store Offset1:> Yes
and <Store
Offset2:>
No
<Horiz Offset:> User input
<Height Offset:> User input
<Identifier:> User input
<Prefix/Suffix:> Prefix
Suffix
Next step
PAGE (F6) changes to the Code page.
TPS1200
Description
Activates logging of offset points.
All other fields in the screen are active and can
be edited with this setting.
Deactivates logging of offset points and all fields in
this screen.
The horizontal offset between -1000 m and 1000 m at
which the offset point is collected.
The height offset between -100 m and 100 m from the
related auto point.
The identifier with up to four characters is added in
front of or at the end of the ID of the auto point. This
ID is then used as the point ID for the related offset
point. This could support an automatic workflow into
CAD packages including setting symbols and
stringing lines.
Adds the setting for <Identifier:> in front of the auto
point ID.
Adds the setting for <Identifier:> at the end of the
auto point ID.
1226