Leica TPS1200 series Technical Reference Manual page 844

Determine Coordinate System - General
DET C SYS
Configuration,
Twostep page
Field Option
<Default Height
SF:>
User Entered Height scale factor can be manually typed in.
Known
WGS84 Pt
Known
WGS84 Ht
Next step
PAGE (F6) changes to the Twostep page. Refer to paragraph "DET C SYS Configuration,
Twostep page".
Description of fields
Field Option
<Default Rotation:>
Use WGS84
North
User Entered Rotation can be manually typed in.
Convergnce
Angle
TPS1200
Description
The default method for determining the height scale
factor to be used in the transformation process.
Height scale factor defined by a known point on the
WGS 1984 datum.
Height scale factor defined by the known height of a
point on the WGS 1984 datum.
Description
The default rotation method to be used in the trans-
formation process.
Rotate to North as defined by WGS 1984.
Angle between grid North and geodetic North at a
certain point. Refer to "39.2 Determine Coordinate
System - Onestep Transformation" paragraph "DET
C SYS Step 4: Determine Rotation" for a diagram.
844