Working Example - Leica TPS1200 series Technical Reference Manual

Reference Line
42.6.2
Description
Diagram
Requirements

Working Example

Application:
Reference line/arc:
Working technique:
d1
P1
TPS12_132
• The reference arc is already defined and saved in a job.
• <Write Logfile: Yes> in REFLINE Configuration, Logfile page.
TPS1200
A curb is to be defined using offsets from the centreline of a road
that is being built.
The defined centre line of the curve is used as a reference arc.
set <EDM Mode: Tracking> and <Automation: LOCK> in
CONFIGURE EDM & ATR Settings.
P0
d2
P0 Start point
P1 End point
d1
d2
<Along Arc:>
<Stake Offset:>
1010