Leica TPS1200 series Technical Reference Manual page 1145

Setup
Field Option
<No. of Points:> Output
<Set:> Choicelist
E, N, Ht, Ori,
E, N, Ht or E,
N, Ori
Ht,Ori,
Ht or Ori
<Instrument Ht:> Output
<Stn Easting:> Output
<Stn Northing:> Output
<Stn Height:> Output
<New Azimuth> Output
Description
Number of points used in calculation.
The selected options are set and stored in the
system. All other values are taken from the current
system setup.
Available for <Method: Resection> and <Method:
Resection Helmert>.
Available for <Method: Ori & Ht Transfr>.
The current instrument height.
For <Method: Ori & Ht Transfr> Easting is displayed
either from fixpoint job or system, as selected.
For <Method: Resection> and <Method: Resec-
tion Helmert> the calculated Easting is displayed.
For <Method: Ori & Ht Transfr> Northing is
displayed either from fixpoint job or system, as
selected.
For <Method: Resection> and <Method: Resec-
tion Helmert> the calculated Northing is displayed.
The calculated Height is displayed.
New oriented azimuth with running angle as tele-
scope moves.
TPS1200 1145