Set azimuth
step-by-step
Setup
Field
Option
<Current Scale:>
Output
Next step
IF
the next page is to be accessed
the station and orientation is to be set
Application:
Set up the instrument over a known point with orientation to a point
with known azimuth.
Settings:
Set <Automation: ATR> in CONFIGURE EDM & ATR Settings.
•
The following table explains the most common settings.
•
Refer to the stated chapter for more information on screens.
Description
1.
Access SETUP Set Stn & Ori - Set Azimuth.
2.
SETUP Set Stn & Ori - Set Azimuth, Setup page
<Azimuth:> The azimuth to the backsight point.
Description
The geometric scale correction is displayed.
The correction displayed depends upon the options
chosen in CONFIGURE TPS Corrections, GeoPPM
page. Refer to "17.4 TPS Corrections" for details.
THEN
PAGE (F6) changes to the Setup page.
SET (F1) to set the station and orientation.
TPS1200
Refer to
chapter
45.6.2
1123