Configuring Traverse - Leica TPS1200 series Technical Reference Manual

51.3
Access
TRAVERSE
Configuration,
Parameters page
Traverse

Configuring Traverse

Select Main Menu: Programs...\Traverse. In TRAVERSE Traverse Begin press CONF
(F2) to access TRAVERSE Configuration.
OR
Press PROG. Highlight Traverse. CONT (F1). In TRAVERSE Traverse Begin press
CONF (F2) to access TRAVERSE Configuration.
OR
Press SHIFT CONF (F2) in TRAVERSE Traverse Information.
This screen consists of the Parameters page, the Tolerances page and the Logfile page.
The explanations for the softkeys given below are valid for all pages, unless otherwise
stated.
CONT (F1)
To accept changes and to return to the screen
from where this screen was accessed.
DMASK (F3)
To edit the display mask currently being
displayed in this field. Accesses CONFIGURE
Define Display Mask n. Available for
<Display Mask:> being highlighted on
Parameters page.
PAGE (F6)
To change to another page on this screen.
TPS1200 1279