Leica TPS1200 series Technical Reference Manual page 1005

Reference Line
Description of fields
Field Option
<Point ID:> User input
<Reflector Ht:> User input
or
<hr:>
PAGE (F6)
To change to another page on this screen.
SHIFT CONF (F2)
To configure a reference line/arc. Accesses
REFLINE Configuration. Refer to "42.3
Configuring Reference Line".
SHIFT POS2D (F3)
To position the telescope (X,Y) onto the point
to be staked.
SHIFT POS3D (F4)
To position the telescope (X,Y,Z) onto the
point to be staked.
SHIFT INDIV (F5) and SHIFT RUN (F5)
To change between entering an individual
point ID different to the defined ID template
and the running point ID according to the ID
template. Refer to "16.1 ID Templates".
Description
The point ID of the target point to be staked.
The default reflector height as defined in the active
configuration set is suggested.
TPS1200 1005