39.4
Access step-by-step
DET C SYS
Step 2: Choose Parame-
ters
Determine Coordinate System - One Point Localisa-
tion
Determine Coordinate System - Classic 3D Transformation
Step
Description
1.
Refer to "39.1 Accessing Determine Coordinate System - One Point Localisation"
to access DET C SYS Step 1: Choose Transform Type.
2.
DET C SYS Step 1: Choose Transform Type
<Transfrm Type: Classic 3D>
3.
CONT (F1) to access DET C SYS Step 2: Choose Parameters.
CONT (F1)
To confirm the selections and to continue with
the subsequent screen.
TPS1200
907