Leica TPS1200 series Technical Reference Manual page 1305

Volume Calculations
Description of fields
Field Option
<Point ID:> User input
REC (F3)
To record data.
If <EDM Mode: Tracking> and/or <Log Auto
Pts: Yes>, records measured point and
continues tracking.
>BNDY (F3) / >SURF (F3)
To change the class of the point to be meas-
ured between surface point and boundary
point.
DONE (F5)
To finish measuring and to return to the
Volumes Calculations Menu.
PAGE (F6)
To change to another page on this screen.
SHIFT INDIV (F5) and SHIFT RUN (F5)
To change between entering an individual
point ID different to the defined ID template and
the running point ID according to the ID
template. Refer to "16.1 ID Templates".
Description
The identifier for manually occupied points. The
configured point ID template is used. The ID can be
changed in the following ways:
• To start a new sequence of point ID's type over the
point ID.
TPS1200 1305