Leica TPS1200 series Technical Reference Manual page 853

DET C SYS
Step 3: Match Points (n)
Determine Coordinate System - Normal
Field Option
Output
<Projection:> Choicelist
<Geoid Model:> Choicelist
<CSCS Model:> Choicelist
Next step
CONT (F1) continues to DET C SYS Step 3: Match Points (n).
This screen provides a list of points chosen from <WGS84 Pts Job:> and <Local Pts Job:>.
The number of control points matched between both jobs is indicated in the title, for example
DET C SYS Step 3: Match Points (4). Unless there is no pair of matching points in the list
all softkeys are available. Refer to "38.4 Matching Points" for information on how to match
points.
Description
The ellipsoid being used by a hard wired projection
when selected in <Projection:>.
The projection to use in the transformation. All
projections from MANAGE Projections can be
selected.
The geoid model to use in the transformation. Geoid
models from MANAGE Geoid Models can be
selected.
The CSCS model to use in the transformation. All
CSCS models from MANAGE CSCS Models can be
selected.
TPS1200 853