Leica TPS1200 series Technical Reference Manual page 1003

Hide thumbs Also See for TPS1200 series:

Table of Contents

The Ref Line page

Reference Line

CONT (F1) to accept changes and continue to REFLINE XX Stakeout.

The pages shown are those from a typical configuration set. An additional page is available

when a user defined display mask is used.

Refer to "46.4.1 Elements of the Graphical Display in the Stakeout" for an explanation of the

appearance of the elements of the graphical display within this screen. The display changes

depending on what option is chosen for <Orientate:> in REFLINE Configuration, General

This screen contains different fields depending on the options chosen for <Stake Mode:> in

REFLINE Configuration, General page. The explanations for the fields and softkeys given

below are valid as indicated.

If <Auto Position: Yes> in STAKEOUT Configuration, General page the instrument will

position the telescope to the point to be staked automatically.

For <Heights: Use Ref Line>

The height of the target point can be input. The

suggested height is the height of the reference