Accessing Remote Point - Leica TPS1200 series Technical Reference Manual

Hide thumbs Also See for TPS1200 series:

Table of Contents

Survey - Remote Point

Survey Remote Point,

Remote Pt page

Accessing Remote Point

Remote point measurements are possible from the Survey application program when <Use

Remote Pt: Yes> is set in the SURVEY Configuration, Remote Pt page and a valid

distance measurement is available. Refer to "49.3 Configuring Remote Point".

Unless <Display Mask: None> in SURVEY Configuration, Remote Pt page, this screen

contains an additional, user defined display mask.

REMOT (F4) in SURVEY Survey: Job Name after one point is measured.

Stores the remote point. Stays in the SURVEY

Survey Remote Point screen.

Returns to SURVEY Survey: Job Name. The

distance measurement is cleared.