Accessing Stakeout - Leica TPS1200 series Technical Reference Manual

Stakeout
46.2
Access
STAKEOUT
Stakeout Begin

Accessing Stakeout

Select Main Menu: Programs...\Stakeout.
OR
Press PROG. Highlight Stakeout. CONT (F1). Refer to "35.2 Accessing the Programs
Menu" for information on the PROG key.
OR
Press a hot key configured to access the screen STAKEOUT Stakeout Begin. Refer to
"2.1 Hot Keys" for information on hot keys.
OR
Press USER. Refer to "2.2 USER Key" for information on the USER key.
OR
Press STAKE (F5) from another application program, for example COGO.
TPS1200
CONT (F1)
To accept changes and access the subsequent
screen. The chosen settings become active.
CONF (F2)
To configure Stakeout application program.
Accesses STAKEOUT Configuration. Refer
to "46.3 Configuring Stakeout".
SETUP (F3)
To set up station. Accesses SETUP Station
Setup.
CSYS (F6)
To select a different coordinate system.
1162