Leica TPS1200 series Technical Reference Manual page 1044

Reference Plane & Face Scan
Edit a reference plane
step-by-step
Select a reference plane
from the job step-by-
step
Step Description
1. Refer to "43.2 Accessing Reference Plane" to access REFPLANE Reference
Plane Begin.
2. CONT (F1) to access REFPLANE Choose Task & Reference Plane.
3. REFPLANE Choose Task & Reference Plane
Select <Plane to Use: Select From Job>.
Highlight <Ref Plane:>
4. ENTER to access REFPLANE Manage Reference Planes.
5. REFPLANE Manage Reference Planes
EDIT (F3) to access REFPLANE Edit Reference Plane, General page.
6. REFPLANE Edit Reference Plane, General page
Continue with Step 5. from paragraph "Create reference plane step-by-step".
Step Description
1. Refer to "43.2 Accessing Reference Plane" to access REFPLANE Reference
Plane Begin.
2. CONT (F1) to access REFPLANE Choose Task & Reference Plane.
3. REFPLANE Choose Task & Reference Plane
Select <Plane to Use: Select From Job>.
4. Highlight <Ref Plane:>
5. ENTER to access REFPLANE Manage Reference Planes.
TPS1200 1044