Leica TPS1200 series Technical Reference Manual page 1073

Measure sets
step-by-step
Sets of Angles
Field Option
<∆ V:> Output
<∆ Slope:> Output
Next step
ALL (F1) to measure further sets of the selected points.
• Motorised instruments point automatically in the direction of the targets.
• Instruments with ATR and <Auto Survey: On> measure the targets automatically.
Step Description
1. Refer to " Select points step-by-step" for information on how to select points.
2. SETS Measure Sets
<No. of Sets:> enter the number of sets to be measured.
3. CONT (F1) to access SETS Set XX of XX, Pt XX of XX, Sets page.
• motorised instruments measure the targets automatically.
• non motorised instruments guide to the next point to be measured; follow the
instructions given.
4. SETS Set XX of XX, Pt XX of XX, Sets page.
ALL (F1) to measure and record.
Description
Difference between the current vertical angle and the
horizontal angle to this target when selected.
Difference between the current slope distance to the
target and the slope distance to this target when
selected.
TPS1200 1073