Leica TPS1200 series Technical Reference Manual page 972

Hide thumbs Also See for TPS1200 series:

Table of Contents

Reference Line

For <Task: XX Arc>

<Method:> The method by which the reference arc will be

defined. <Method: 3 Points> defines the reference arc using

three known points. <Method: 2 Points/Radius> defines the

reference arc with two known points and a known radius.

<Arc Dist:> The horizontal grid distance along the arc between

<Start Point:> and <End Point:> of the arc. ----- is displayed if the

distance cannot be calculated.

Choose the method by which to define a reference line/arc and enter

the appropriate parameters.

SURVY (F5) available for <Start Point:>, <Second Point:> and

<End Point:>. To measure a known point.

For all point fields, the MapView interactive display on the Map page

can be used to select the desired point.

PAGE (F6) to access REFLINE New Reference XX, Map page.

REFLINE New Reference XX, Map page

MapView displays the reference line/arc as a solid line.

STORE (F1) to store changes and return to REFLINE Manage

Reference XX.