Leica TPS1200 series Technical Reference Manual page 1184

Stakeout
STAKEOUT
Orthogonal Stakeout,
Map page
Stake out in orthogonal
from station mode
step-by-step
Field Option
<Design Ht:> or User input
<D Ht:>
Next step
PAGE (F6) changes to the Map page. Refer to paragraph "STAKEOUT Orthogonal
Stakeout, Map page".
The Map page provides an interactive display of the data. Refer to "34 MapView Interactive
Display Feature" for information on the functionality and softkeys available.
Next step
PAGE (F6) changes to the first page on this screen.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
TPS1200
Description
Available for <Edit Height: Yes> in STAKEOUT
Configuration, Heights page.
The design height, which is the height of the point to
be staked, is displayed as orthometric height. If the
orthometric height cannot be displayed, the local
ellipsoidal height is displayed. If it is not possible to
display the local ellipsoidal height, the WGS 1984
height is displayed. The value for <Height Offset:>
configured in STAKEOUT Configuration, Heights
page is not taken into account.
Changing the value for <D Ht:> changes the values
displayed for <CUT:> and <FILL:>.
1184