Leica TPS1200 series Technical Reference Manual page 857

Determine Coordinate System - Normal
Description of columns
Column Description
WGS84 Pts The point ID of the points chosen from <WGS84 Pts Job:>.
East The Easting residual. If positions were not used in the transformation
calculation then ----- will be displayed.
North The Northing residual. If positions were not used in the transformation
calculation then ----- will be displayed.
Height The Height residual. If heights were not used in the transformation
calculation then ----- will be displayed.
Indicates residuals that exceed the residual limit defined in DET C
SYS Configuration, Residuals page.
Indicates the largest residual in East, North and Height.
Next step
IF the residuals are THEN
unacceptable ESC returns to DET C SYS Step 3: Match Points (n). Matched
points can be edited, deleted or temporarily removed from the list and
the transformation recalculated.
acceptable CONT (F1) continues to DET C SYS Step 5: Store Coord System.
TPS1200 857