Setup; Overview - Leica TPS1200 series Technical Reference Manual

Setup

45
45.1
Description
Setup

Overview

Setup
The Setup program is used when setting up a TPS station, to determine the TPS station
coordinates (with TPS and/or GPS measurements) and setting the TPS orientation.
Setup with GPS, using SmartPole
SmartPole enables target points to to be
determined from GPS measurements, which
can then be used as control points for the
TPS station setup.
TPS1200
Setup with GPS, using SmartStation
SmartStation enables TPS station coordi-
nates (position and height) to be determined
from GPS measurements.
1090