Survey Cross Section
Step
Description
1.
Start the Survey Cross Section application program.
2.
X-SECTION Begin
<Codelist:> The codelist containing the point codes TB1, BB1, BB2,
EB1, CL, EB2, BB3, BB4 and TB2 must be displayed.
Check the settings.
3.
CONF (F2)
4.
X-SECTION Configuration
<Method: ZigZag>
<Direction: Forward>
<Show Dist: Yes>
5.
CONT (F1)
6.
Have cross section templates been defined yet?
•
If yes, continue with step 18.
•
If no, continue with step 7.
7.
OK (F4) to confirm the information message and to access X-
SECTION New Template.
8.
X-SECTION New Template, General page
<Template Name:> Type in a name for the new cross section
template.
9.
PAGE (F6) to access X-SECTION New Template, Elements page
TPS1200
1270
Refer to
chapter
50.2
50.2
7.3
50.3
50.5.2