Leica TPS1200 series Technical Reference Manual page 919

GPS Survey
Description of fields
Field Option
<Point ID:> User input
SHIFT CONEC (F3) and SHIFT DISCO (F3)
To dial the number of the reference station
configured in the active configuration set and
to hang up immediately after the survey is
completed. Available for
devices of type digital cellular phone or
modem. Available for <Auto CONEC: No> in
CONFIGURE GSM Connection.
SHIFT INIT (F4)
To select an initialisation method and to force
a new initialisation. Available for configuration
sets allowing phase fixed solutions.
SHIFT INDIV (F5) and SHIFT RUN (F5)
To change between entering an individual
point ID different to the defined ID template
and the running point ID according to the ID
template. Refer to "16.1 ID Templates".
Description
The identifier for manually occupied points. The
configured point ID template is used. The ID can be
changed:
• To start a new sequence of point ID's overtype the
point ID.
TPS1200
GPS
real-time
919