Creating A New Antenna - Leica TPS1200 series Technical Reference Manual

40.2.3
Access
Create new antenna
step-by-step
GPS Survey

Creating a New Antenna

Refer to "40.2.2 Accessing Antenna Management" to access MANAGE Antennas.
The following table explains the most common settings.
Step Description
1. In MANAGE Antennas press NEW (F2).
2. MANAGE New Antenna, General page
<Name:> A unique name for the new antenna.
<Hz Offset:> Horizontal offset of measurement reference point.
<V Offset:> Vertical offset of measurement reference point.
<L1 PhOffset:> Offset of L1 phase centre.
<L2 PhOffset:> Offset of L2 phase centre.
<Copy Additional Corrections:> Allows additional corrections to be copied from
the antenna which was highlighted when MANAGE New Antenna was accessed.
All offsets are copied from the antenna which was highlighted when MANAGE
New Antenna was accessed.
3. PAGE (F6) to access MANAGE New Antenna, IGS page.
4. MANAGE New Antenna, IGS page
<IGS Name:> The International GPS Service name of the antenna.
<Serial Number:> The serial number of the antenna.
<Set Up Number:> The set up number of the antenna. This identifies the version
number of the current calibration.
TPS1200 925