Leica TPS1200 series Technical Reference Manual page 996

Reference Line
Step Description
1. Refer to "42.2 Accessing Reference Line" to access REFLINE Refer-
ence Line/Arc Begin.
2. REFLINE Reference Line/Arc Begin
Select a job and a configuration set with the settings mentioned
above.
3. CONT (F1) to access REFLINE Choose Task & Reference Line,
Reference page.
4. REFLINE Choose Task & Reference Line, Reference page
<Task: Measure to Line>
<Ref to Use: Manually Enter>
<Method: 2 Points>
5. Highlight <Start Point:>.
6. SURVY (F5) to measure P2.
7. Highlight <End Point:>.
8. SURVY (F5) to measure P3.
The Map page provides an interactive display of the defined refer-
ence line.
9. CONT (F1) to access REFLINE Measure Points.
10. Walk to the first point to be measured.
11. REFLINE Measure Points
TPS1200 996
Refer to
chapter
42.2
42.4.1
34
42.5