Sets Of Angles; Accessing Sets Of Angles - Leica TPS1200 series Technical Reference Manual

44.2
44.2.1
Access
SETS
Sets of Angles Begin

Sets of Angles

Sets of Angles

Accessing Sets of Angles

Select Main Menu: Programs...\Sets of Angles.
OR
Press PROG. Highlight Sets of Angles. CONT (F1).
Refer to "35.2 Accessing the Programs Menu" for information on the PROG key.
OR
Press a hot key configured to access the screen SETS Sets of Angles Begin.
Refer to "2.1 Hot Keys" for information on hot keys.
OR
Press USER. Refer to "2.2 USER Key" for information on the USER key.
CONT (F1)
To accept changes and access the next
screen. The chosen settings become active.
CONF (F2)
To configure the Sets of Angles program.
Accesses SETS Configuration. Refer to
"44.2.2 Configuring Sets of Angles".
SETUP (F3)
To set up the station. Accesses SETUP
Station Setup.
TPS1200 1055