Leica TPS1200 series Technical Reference Manual page 1256

Survey Cross Section
Field Option
<Reflector Ht:> User input
<Template:>
Choicelist
Output
<Element:> Output
TPS1200
Description
• To start a new sequence of point ID's type over
the point ID.
• For an individual point ID independent of the ID
template SHIFT INDIV (F5). SHIFT RUN (F5)
changes back to the next ID from the configured
ID template. Refer to "16.1 ID Templates".
The reflector height.
The active template for the cross section.
The cross section template is closed.
Opening the choicelist accesses X-SECTION
Templates where a new template can be created
and an existing template can be selected or deleted.
Refer to "50.5 Cross Section Templates".
----- is displayed if no template is defined.
The cross section template is open.
Displayed as x/y.
x Number of next element on active template. The
number increases/decreases as moving across
the cross section depending on the selection for
<Method:> in X-SECTION Configuration.
y Total number of elements on active template.
1256