Leica TPS1200 series Technical Reference Manual page 1132

Hide thumbs Also See for TPS1200 series:

Table of Contents

Measure Target

Select Meas All Now if a "Standard" setup is required.

Select Add Points Later if an "On-the-Fly" setup is required.

The geometric scale correction is displayed.

The correction displayed depends upon the options chosen in CONFIGURE

TPS Corrections, GeoPPM page:

• if <Calc Scale: Automatically>, <Computd Scale:> is displayed.

• if <Calc Scale: Manually>, <Current Scale:> is displayed.

Press CONT (F1) to access SETUP Measure Target.

To measure and store the distances and

angles made to the control points. After storing

the measurement data to the <Job:>, the next

<Point ID:> in the job is displayed. The instru-

ment positions to the point if enough data is

To measure and display distances.