Leica TPS1200 series Technical Reference Manual page 1080

Sets of Angles
Column Description
Resdl V •
•
Avg Hz •
Avg V •
•
Mean Hz •
Mean V •
Description of columns when calculating distances
Column Description
Point ID •
•
•
Use •
•
Resdl SD •
TPS1200
Residual in the V value of the selected point within the single set.
The following two columns appear together. By pressing MORE
(F5) these columns are replaced with other columns.
Reduced Average Hz value of the point in all active sets.
Average V value of the point in all active sets.
The following two columns appear together. By pressing MORE
(F5) these columns are replaced with other columns.
Mean Hz value of the point within the single set.
Mean V value of the point within the single set.
This column is always visible.
Point ID of the measured points in the order they were defined and
measured in SETS Measure New Points truncated to six digits
from the right.
The following three columns appear together. By pressing MORE
(F5) these columns are replaced with other columns.
For Yes: The selected point is used for calculations in all sets.
For No: The selected point is not used for calculations in all sets.
Residual in the distance value of the point within the single set.
1080