Selecting A New Pair Of Matching Points - Leica TPS1200 series Technical Reference Manual

Determine Coordinate System - Normal
38.4.2
Match points step-by-
step

Selecting a New Pair of Matching Points

Step Description
1. Refer to "38.2 Determining a New Coordinate System" to access DET C SYS Step
3: Match Points (n).
2. NEW (F2) to access DET C SYS Choose Matching Points.
3. DET C SYS Choose Matching Points
<WGS84 Point:> A WGS 1984 control point. All WGS 1984 stored points from
MANAGE Data: Job Name can be selected.
<Known Point:> A local control point. All local stored points from MANAGE Data:
Job Name of any class, except NONE, can be selected.
<Match Type:> The type of match to be made between the points selected in
<WGS84 Point:> and <Known Point:>. Position and Height, Position Only,
Height Only or None.
• For <Transfrm Type: Onestep> or <Transfrm Type: Twostep> possible
options are Pos & Ht, Pos Only, Height Only or None.
• For <Transfrm Type: Classic 3D> possible options are Pos & Ht or None.
Select a control point from both jobs that occupy the same position on the different
datums.
SURVY (F5). Available when <Known Point:> is highlighted. To measure a point
and store it in <Local Pts Job:>.
4. CONT (F1) returns to DET C SYS Step 3: Match Points (n) and adds a new line
of matched points to the matched points list.
TPS1200 864