Leica TPS1200 series Technical Reference Manual page 945

Hide thumbs Also See for TPS1200 series:

Table of Contents

of measured points

Deleting points

Reference Line

Heights and positions are always taken into account. Points must have full coordinate

The properties stored with staked points are:

Sub class: TPS

Source: RefLine (Grid), RefLine (Meas) or RefLine (Stake)

Instrument source: TPS

A point that is used to define a reference line/arc can be deleted. A reference line/arc can still

be used if one or more points defining the reference line/arc have been deleted. Within

REFLINE Edit Reference Line and REFLINE Edit Reference Arc the deleted point field is

shown in grey. Within MapView the reference line is still displayed but the deleted point or

points is/are not.

Reference point:

The term "reference point" is used in this chapter to refer to the point

from which the perpendicular offset from the reference line/arc, to the

target point, is measured. Refer to paragraph "Defining a reference

line/arc" and the diagrams for further explanation.

Target point:

The design point.

Measured point:

The current position.

For measuring to a reference line, this is the point with the coordi-

nates of the current position and the designed or calculated height.

For staking or grid staking to a reference line, this is the point to be