Leica TPS1200 series Technical Reference Manual page 1186

Stakeout
Step Description
When the value is at or nearly zero, the current position is the point
to be staked.
11. Hold the reflector steady over the marker.
12. REC (F1) stores distance and angles.
For <Pos Check: Yes> and/or <Height Check: Yes> in STAKEOUT
Configuration, Checks page, a check is made on the horizontal
and/or vertical coordinate distance from the staked point to the point
to be staked. If either of the configured difference limits are exceeded,
STAKEOUT Difference Limit Exceeded is accessed.
13. Are more points to be staked?
• If yes, continue with step 14.
• If no, continue with step 16.
14. STAKEOUT Orthogonal Stakeout, Stake page
According to sort and filter settings, the subsequent point in
<Stakeout Job:> is suggested for staking out.
15. Repeat steps 8. to 13.
16. SHIFT QUIT (F6) to return to the screen from where STAKEOUT
Stakeout Begin was accessed.
TPS1200 1186
Refer to
chapter
46.4.6