Reference Line
Step
Description
15.
ALL (F1) measures and stores the point.
The results are displayed on the screen.
It may happen that a point with the same point ID exists in the job. If
the codes and/or attribute values of the new and the existing point do
not match, a screen opens where they can be corrected.
16.
Repeat steps 14. and 15. until all grid points have been staked.
The Map page provides a graphical view of the defined reference line
and the points that have been staked out. Displayed is also
•
the horizontal distance from the current position to the point to be
staked along the line between the instrument and the current posi-
tion or along the orientation line.
•
the difference between the measured height and the height to be
staked.
17.
SHIFT QUIT (F6) returns to TPS1200 Main Menu.
The results are written to the logfile.
TPS1200
Refer to
chapter
34
1025