Leica TPS1200 series Technical Reference Manual page 1280

Traverse
Description of fields
Field Option
<MeasMethod:> B'F'...F''B''
B'F'...B''F''
B'B''F'F''
B'B''F''F'
B'F'...
<Foresight:> Single or
Multiple
<Auto Survey:> On or Off
<Display Mask:> Choicelist
TPS1200
Description
All points are measured in face I, then measured in
face II in reverse sequential order.
All points are measured in face I, then measured in
face II.
Backsight point is measured in face I immediately
followed by face II. Other points are measured in face
I, face II order.
Backsight point is measured in face I immediately
followed by face II. Other points are measured in
alternating face order.
All points are measured in face I only.
Option to define if only one foresight point or multiple
points are used during the sets.
For instruments with ATR and <Auto Survey: On>
ATR search and ATR measurements are done to
specified targets and subsequent sets.
The user defined display mask to be shown in
TRAVERSE XX, Set:X/X. All display masks of the
active configuration set defined in CONFIGURE
Display Settings can be selected.
1280