Leica TPS1200 series Technical Reference Manual page 859

DET C SYS
Step 5: Store Coord
System,
Coord System page
Determine Coordinate System - Normal
Field Option
<Matched Pts:> Output
<Easting:> Output
<Northing:> Output
<Height:> Output
Next step
PAGE (F6) changes to the Coord System page. Refer to paragraph "DET C SYS Step 5:
Store Coord System, Coord System page".
For <Transfrm Type: Onestep>
Description of fields
Field Option
<Residuals:> None,
1/Distance
or Multiquad-
ratic
<Geoid Model:> Output
Description
Number of matched points, as defined in DET C SYS
Step 3: Match Points (n).
Largest Easting residual from the transformation
calculation.
Largest Northing residual from the transformation
calculation.
Largest Height residual from the transformation
calculation.
Description
The method by which the residuals of the control
XX
points will be distributed throughout the transforma-
tion area. Refer to "37.3.1 Configuring Determine
Coordinate System - Normal" paragraph "DET C
SYS Configuration, Residuals page".
Name of geoid model used, as defined in DET C SYS
Step 2: Choose Parameters.
TPS1200 859