Leica TPS1200 series Technical Reference Manual page 1220

Survey - Auto Points
Field Option
Choicelist
User input
<Code Desc:> Output
TPS1200
Description
• If a line code is selected then any open line is
closed and a new line with the selected code is
created. The line ID is defined by the configured
line ID template. The occupied point is assigned
to that line. The line stays open until it is closed
manually or another line code is selected.
• If an area code is selected then the behaviour is
as for lines.
Available for <Thematc Codes: With Codelist>.
The setting for <Show Codes:> in CONFIGURE
Coding & Linework determines if either all codes or
only point codes are available. The attributes are
shown as output, input or choicelist fields depending
on their definition.
Available for <Thematc Codes: Without Codelist>.
Codes can be typed in but not selected from a
codelist. A check is performed to see if a code of this
name already exists in the job. If so, the according
attributes are shown.
Configure a display mask with a choicelist for code
types to define if a point, line or area code is typed in.
The description of the code.
1220