Leica TPS1200 series Technical Reference Manual page 1149

Setup
Description of columns
Column Description
The indicates that the delta value of either measured horizontal
angle, distance or height exceeds the calculation limit.
Point ID The point ID of the measured target points.
Use Indicates if and how a target point is used in the station calculation.
Choices are 3D, 2D, 1D and NO.
∆Hz Can be displayed by pressing
Difference between calculated and measured horizontal angle for the
target points. If a target point does not have coordinates, ----- are
displayed. Differences exceeding the defined limit are indicated by a
*.
MORE (F5)
To change between displaying
∆
column.
SHIFT SURVY (F5)
Accesses the SETUP Measure Target screen
to measure more target points.
PAGE (F6)
To change to an other page on the screen.
Refer to "34 MapView Interactive Display
Feature" for more information.
TPS1200
∆ ∆
Height, East and North in the fourth
MORE (F5).
∆ ∆
Hz, Distt,
1149