Survey - Auto Points
Field
Option
Next step
IF the display mask THEN
is not to be config-
CONT (F1) closes the screen and returns to the screen from where
ured
SURVEY Configuration, Auto Points page was accessed.
is to be configured
DMASK (F3). Refer to paragraph "SURVEY Configure Auto Pts
Display Mask".
TPS1200
Description
This is the measurement mode for the interpolation
of angle measurements in IR LOCK Tracking mode.
In difference to normal IR LOCK Tracking mode,
where angle measurements are only assigned to
certain distance measurements, SynchroTrack will
perform a linear interpolation between the previous
and following angle measurement, based upon the
timestamp of the EDM measurement.
When the logging of auto points has started, SYNC
is displayed as an icon.
1212