Leica TPS1200 series Technical Reference Manual page 1047

Reference Plane & Face Scan
Step Description
PLANE (F5) to edit the selected reference plane.
SHIFT INDIV (F5) for an individual point ID independent of the ID template. SHIFT
RUN (F5) changes back to the next ID from the configured ID template.
6. PAGE (F6) to change to the Map page.
7. REFPLANE Measure Points to Plane, Map page.
SHIFT FACE (F1) to access the face view of the plane.
SHIFT PLAN (F1) to access the plan view of the plane.
8. ALL (F1) to measure points on the plane.
TPS1200 1047