Leica TPS1200 series Technical Reference Manual page 1081

Sets of Angles
Column Description
Avg SD •
•
Mean SD •
Next step
IF THEN
additional informa- MORE (F5) to show additional information.
tion is to be viewed
residuals are to be CONT (F1) to access SETS View XX Results.
exited
the setting for use is USE (F4) to change between Yes and No for the highlighted point.
to be changed
Average distance value of the point in all active sets.
The following column appears. By pressing MORE (F5) this
column is replaced with other columns.
Mean distance value of the point within the single set.
TPS1200 1081