Manual Entry Of Points To Be Staked - Leica TPS1200 series Technical Reference Manual

46.4.2
Description
Manual entry of points
step-by-step
Stakeout

Manual Entry of Points to be Staked

Manual entry of points to be staked can be used to input angle and distance values.
It is possible to type in angles and distances independent of the used <Stake Mode:>.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Set up and orient the instrument.
2. Start the Stakeout application program.
3. STAKEOUT Stakeout Begin
Check the settings.
4. CONT (F1) to access STAKEOUT XX Stakeout.
5. STAKEOUT XX Stakeout
SHIFT MSTAK (F3) to access STAKEOUT Manual Entry.
6. STAKEOUT Manual Entry
Enter the values of the point to be staked.
7. STAKE (F1) to access STAKEOUT XX Stakeout.
The point is created and the coordinates of the point are remembered
allowing the point to be staked out.
8. STAKEOUT XX Stakeout
TPS1200
Refer to
chapter
45
46.4
1177