Leica TPS1200 series Technical Reference Manual page 1260

Survey Cross Section
Next step
IF a cross section THEN
template
is to be selected highlight the desired cross section template.
CONT (F1) closes the screen and returns to the screen from where
X-SECTION Templates was accessed.
TPS1200
CONT (F1)
To select the highlighted cross section
template and to return to the screen from
where this screen was accessed.
NEW (F2)
To create a cross section template. Refer to
"50.5.2 Creating a New Cross Section
Template".
EDIT (F3)
To edit the highlighted cross section template.
Refer to "50.5.3 Editing a Cross Section
Template".
DEL (F4)
To delete the highlighted cross section
template.
COPY (F5)
To create a cross section template based on
the one currently highlighted.
1260